Camesa
Camesa EMC Banner 2

EMC Product Catalog

7/32 (5.69mm) 1N22-GeoSteam

7/32 (5.69mm) 1N22-GeoSteam

PROPERTIES:

Cable Diameter: 0.224” +0.005” - 0.002” (5.69mm +0.13mm -0.05mm)
Minimum Sheave Diameter: 14” (36 cm)
Cable Stretch Coefficient: 2.5 ft/Kft/Klbs (2.81 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 1,200
Conductor AWG Rating: 16
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @ 500 VDC (457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance: 4.4 Ω/Kft (14.4 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 5,600 lbs (24.9 KN) Nominal
Maximum Suggested Working Tension: 2,800 lbs (12.45 KN)
Number and Size of Wires:
Inner Armor 12 x 0.0310” (0.787 mm)
Outer Armor 18 x 0.0310” (0.787 mm)
Average Wire Breaking Strength:
Inner Armor 215 lbs (0.96 KN)
Outer Armor 215 lbs (0.96 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C
 in
mm
in
mm
Ω/Kft
Ω/Km
pf/ft
pf/m
in
mm
lbs/Kft
Kg/Km
1N22WG600*
316*
ECA0.0245
0.662
19x0.0119
19x0.302
4.7
15.4
55
190
0.108
2.743
97
144
80
119

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.

  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F.  Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration. 
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.


View Product Specification Sheet