Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

0.490” (12.45 mm) 7-Conductor Extra-Extra High Strength 7Q49-EEHS

Maximum Conductor Voltage:	1,200 VDC
Conductor AWG Rating:	20
Minimum Insulation Resistance:	1,500 MegΩ/Kft @ 500 VDC	(457 MegΩ/Km @ 500 VDC)
Armor Electrical Resistance:	1.00 Ω/Kft	(3.3 Ω/Km)

Cable Breaking Strength:
Ends Fixed:	30,000 lbs	(133.5 KN)
Maximum Suggested Working Tension:	15,000 lbs	(66.8 KN)
Number and Size of Wires:
Inner Armor	20 x 0.0460”	(1.17 mm)
Outer Armor	20 x 0.0620”	(1.58 mm)
Average Wire Breaking Strength:
Inner Armor	603 lbs	(2.7 KN)
Outer Armor	1,095 lbs	(4.9 KN)

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra, Extra Improved Plow Steel (GEEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
Conductors are “Water Blocked” to reduce water and gas migration. Conductor resistance is measured at 68° F.
The temperature rating assumes a normal gradient for both temperature and weight.
Center conductor construction is 7x0.0142” with a non-conductive center member. The typical resistance is reduced by approximately 5 to 10% and the capacitance is increased by approximately 5 to 10% in comparison to the outer conductors.
All values shown are nominal or typical values.