Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

15/32" (11.79 mm) 7 Conductor-7J46-GeoSteam

PROPERTIES:

Cable Diameter:	0.464” +0.005” - 0.002”	(11.79mm +0.13mm -0.05mm)
Minimum Sheave Diameter:	26”	(66 cm)
Cable Stretch Coefficient:	0.77 ft/Kft/Klbs	(0.87 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage:	1,200
Conductor AWG Rating:	20
Minimum Insulation Resistance:	1,500 MegaΩ/Kft @ 500 VDC	(457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance:	1.3 Ω/Kft	(4.3 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed:	19,100 lbs	(85.0 KN) Nominal
Maximum Suggested Working Tension:	9,500 lbs	(42.5 KN)
Number and Size of Wires:
Inner Armor	24 x 0.0390”	(0.991 mm)
Outer Armor	24 x 0.0495”	(1.257 mm)
Average Wire Breaking Strength:
Inner Armor	357 lbs	(1.51 KN)
Outer Armor	575 lbs	(2.56 KN)

Cable Type	Core Description							Cable Weight
	Temp Rating	Plastic Type	Insulation Thickness	Copper Construction	Res Typical	Cap Typical	O.D. Each	In Air	In H2O	Spec. Gravity
	°F °C		in mm	in mm	Ω/Kft Ω/Km	pf/ft pf/m	in mm	lbs/Kft Kg/Km
7J46SGG	600* 316*	ECA	0.0290 0.737	7x0.0128 7x0.325	11.1 36.4	40 131	0.096 2.438	363 540	300 446

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed and cables are post-tensioned.

The Nickel coated copper wires are made of ASTM3555 Class 10 and they are used to increase corrosion protection conductors.
Core assembly – Copper strand consists of six wires around one center wire and are “water blocked” to reduce water and gas migration. Conductor resistance is measured at 68 deg. F.
The temperature rating assumes a normal gradient for both temperature and weight.
Center conductor construction is 6x0.0142” with a non-conductive center member. The typical resistance is reduced by approximately 5 to 10% and the capacitance is increased by approximately 5 to 10% in comparison to the outer conductors.
All values shown are nominal or typical values.

View Product Specification Sheet