Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

0.377” (9.58 mm) 3-Conductor Cable 3Q37

Maximum Conductor Voltage:	1200 VDC
Conductor AWG Rating:	18
Minimum Insulation Resistance:	1,500 MegΩ/Kft @ 500VDC	(457 MegΩ/Km @ 500VDC)
Armor Electrical Resistance:	1.7 Ω/Kft	(5.6 Ω/Km)

Cable Breaking Strength:
Ends Fixed:	13,200 lbs	(58.74 KN) Nominal
Maximum Suggested Working Tension:	6,600 lbs	(29.37 KN)
Number and Size of Wires:
Inner Armor	16 x 0.0425”	(1.08 mm)
Outer Armor	20 x 0.0470”	(1.19 mm)
Average Wire Breaking Strength:
Inner Armor	383 lbs	(1.71 KN)
Outer Armor	469 lbs	(2.09 KN)

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
Core assembly – Conductors are bound with conductive tape and voids are filled with conductive paste and string.
Conductors are “Water Blocked” to reduce water and gas migration. Conductor resistance is measured at 68° F.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values.
Dacron® does not withstand temperatures exceeding 300°F. Nomex® is available by customer request at time of order for additional cost.